Ex: Face Editing on Solid

Extrude Faces

Home tab > Solid Editing panel > Extrude Faces

Select the face

Specify height of extrusion

Specify angle of taper for extrusion

Press Enter

Press Enter again to exit the command

Offset Faces

Home tab > Solid Editing panel > Offset Faces

Select the front face and the near by 2 curved faces

Press Enter

Specify the offset distance

The faces offset toward front

Move Faces

Change the visual style to Wireframe
Home tab > Solid Editing panel > Move Faces

Select the 3 faces

Rotate the solid by ViewCube

Repeat the rotation by ViewCube

Select all the faces

Press Enter

Specify a base point

Input 50 for the second point

The hole move to the right at 50 units

Rotate Faces

Home tab > Solid Editing panel > Rotate Faces

Draw a line at the mid of the hole for rotate axis reference

Rotate the solid by ViewCube to select all the faces of the hole

Press Enter

Snap to the mid of the reference line for the 1st axis point

Point up in Z direction. make sure the +Z is show, click for the 2nd axis point

Specify a rotation angle, press Enter

Taper Faces

Home tab > Solid Editing panel > Taper Faces

Select the face

Press Enter

Specify the base point

Specify another point along the axis

Input -5 for the taper angle to taper out

Delete Faces

Home tab > Solid Editing panel > Delete Faces

Select the 2 curved faces

Press Enter

The 2 corners become sharp coners

Color Faces

Home tab > Solid Editing panel > Color Faces

Select the face

Press Enter

Select the color

Change visual style to Shaded with Edges

Copy Faces

Home Tab > Solid Editing panel > Copy Faces

Select the face

Press Enter

Specify a base point

Point up, make sure +Z is show

Input 300 for the 2nd point